organic raw materials
"
Additifs au caoutchouc Carbonate d'éthylène organique intermédiaire CAS 96-49-1 Agent mousseux plastique
Rubber Additives Organic Intermediate Ethylene Carbonate CAS 96-49-1 Plastic Foaming Agent Introduction: Colorless needle-shaped crystals. Melting point 38.5-39℃, boiling point 152℃ (4.0kPa), 100℃ (1.07kPa), relative density 1.4259 (20/4℃). Flash point 152℃. Easily soluble in water and organic solvents. Uses: At present, it is mainly used in three aspects. (1) Used as water glass slurry. 1,3-dioxolane and potassium bicarbonate are used as curing agent and quick setting agent
Colorant organique intermédiaire d'acide phtalique CAS 88-99-3 plastifiant en résine de polyester
Dye Organic Intermediate Phthalic Acid CAS 88-99-3 Polyester Resin Plasticizer Introduction: Colorless flaky crystals. Melting point 234℃ (phthalic anhydride is generated when heated to above 200℃), relative density 1.593. Soluble in methanol and ethanol, slightly soluble in water and, insoluble in chloroform. Uses: Used in synthetic resins, synthetic fibers and medicines. Since phthalic acid and phthalic anhydride have similar chemical properties, phthalic anhydride is often
Inhibiteur de rouille intermédiaire organique Tolyltriazole CAS 29385-43-1 Désactivateur de métaux Agent extrême pression
Rust Inhibitor Organic Intermediate Tolyltriazole CAS 29385-43-1 Metal Deactivator Extreme Pressure Agent Introduction: Pure methylbenzotriazole is white granules or powder, which is a mixture of 4-methylbenzotriazole and 5-methylbenzotriazole, with a melting point of 80-86°C. It is insoluble in water, but soluble in organic solvents such as alcohol, benzene, toluene, chloroform, and soluble in dilute alkali solution. Uses: Toluene triazole is mainly used as a rust inhibitor
Intermédiaire organique stabilisateur 1-éthynyl-1-cyclohexanol CAS 78-27-3 Inhibiteur de corrosion
Stabilizer Organic Intermediate 1-Ethynyl-1-Cyclohexanol CAS 78-27-3 Corrosion Inhibitor Introduction: White crystals. Melting point 30-31℃, boiling point 180℃, 66℃ (1.07kPa), refractive index 1.4820 (20℃). Uses: Used in silicone or elastic seals or plugging in oil wells or gas wells as an inhibitor to prevent the organic silicon composition from solidifying on the way to the predetermined position. Adding it to the corrosive medium can significantly reduce the metal
Protecteur de l'argent intermédiaire organique octadécanéthyol CAS 2885-00-9 Produits chimiques de recherche
Silver Protectant Organic Intermediate Octadecanethiol CAS 2885-00-9 Research Chemicals Introduction: Melting point 30-33°C(lit.) Boiling point 204-210°C11mmHg(lit.) Density 0.847g/mLat25°C(lit.)Chemicalbook Vapor pressure
Solution de placage Catalyseur intermédiaire organique 2-cyanoacétamide CAS 107-91-5
Plating Solution Organic Intermediate 2-Cyanoacetamide CAS 107-91-5 Catalyst Introduction: White or light yellow needle crystals or powder. Slightly soluble in water, easily soluble in ethanol. Melting point 119-121 °C (lit.) Boiling point 154.34°C (rough estimate) Density 1,4 g/cm3 Refractive index 1.5110 (estimate) Uses: Cyanoacetamide is used to synthesize malononitrile and electroplating solution, and is also used in the synthesis of drugs such as triamterene and
Améliorant antimicrobien intermédiaire organique 1,3-propanesultone CAS 1120-71-4 Agent d'azurage Colorant Tensioactif diionique
Antimicrobial Enhancer Organic Intermediate 1,3-Propanesultone CAS 1120-71-4 Brightener Dye Diionic Surfactant Introduction: Colorless and odorless liquid. Melting point 30-33 °C (lit.) Boiling point 180 °C/30 mmHg (lit.) Density 1.392 g/mL at 25 °C (lit.) Vapor pressure 0.001-0.48Pa at 20-25℃ Uses: Used in leather making, ink and sensitizing dye synthesis. 1,3-Propane sultone is a new functional fine chemical material. It can react with many types of compounds under very
Lubrifiants Intermédiaire organique Lauryl éthylique CAS 106-33-2 FEMA 2441 Plastifiant Adoucissant
Lubricants Organic Intermediate Ethyl Laurate CAS 106-33-2 FEMA 2441 Plasticizer Softener Introduction: Colorless to light yellow oily liquid with peanut aroma. Insoluble in water, soluble in ethanol, easily soluble in ethe. Has a special fruity odor. Uses: It is widely used in many fields. It is widely used as flavors and fragrances in the food field and daily chemical field. It can also be used as a lubricant, plasticizer, softener and organic synthesis intermediate. It is
Intermédiaire organique adhésif Bisphénol AF CAS 1478-61-1 Agent de réticulation
Adhesive Organic Intermediate Bisphenol AF CAS 1478-61-1 Crosslinking Agent Introduction: Bisphenol AF is also known as hexafluorobisphenol A, 2,2-bis(4-hydroxyphenyl)hexafluoropropane, 2,2-bis(4-hydroxyphenyl)hexafluoropropane, etc., referred to as BPAF. It is slightly soluble in carbon tetrachloride, difficult to dissolve in water, and easily soluble in organic solvents such as ethanol, aceton, ethe, toluene, and strong alkaline solutions. Bisphenol AF can decompose and
