logo
Bem-vindo ao Senzhuo Industry Co.,Ltd
+86-15165036020
Encontrado 32 produtos para "

plastic stabilizer

"
qualidade Materiais-Primas Químicas Oleamida CAS 301-02-0 Agente Auxiliar Químico fábrica

Materiais-Primas Químicas Oleamida CAS 301-02-0 Agente Auxiliar Químico

Chemical Raw Materials Oleamide CAS 301-02-0 Chemical Auxiliary Agent Overview of Chemical Raw Materials Oleamide CAS 301-02-0 Chemical Auxiliary Agent It is a non-ionic surfactant, also known as 9-octadecanoic acid amide or oil amide. It is white powder or sheet at room temperature, non-toxic, and insoluble in water Product Parameters of Chemical Raw Materials Oleamide CAS 301-02-0 Chemical Auxiliary Agent Item Value Product Name Oleamide CAS 301-02-0 MF C18H35NO MW 281.48

qualidade Surfactantes Químicos Diários Ácido Palmítico CAS 57-10-3 FEMA 2832 Emulsionante Dispersante Antiespumante fábrica

Surfactantes Químicos Diários Ácido Palmítico CAS 57-10-3 FEMA 2832 Emulsionante Dispersante Antiespumante

Surfactants Daily Chemicals Palmitic Acid CAS 57-10-3 FEMA 2832 Emulsifier Dispersant Defoamer Introduction: White phosphorus flakes with pearly luster. Insoluble in water, soluble in ethanol. Palmitic acid, also known as hexadecanoic acid, is one of the most widely distributed fatty acids in nature. It is white crystals at room temperature. It is widely present in various oils and fats, such as tung oil, palm oil, lacquer, cottonseed oil, soybean oil, peanut oil, corn germ

qualidade Antioxidante orgânico 1520 C25H44OS2 CAS 110553-27-0 Antioxidante de borracha fábrica

Antioxidante orgânico 1520 C25H44OS2 CAS 110553-27-0 Antioxidante de borracha

Organic Raw Materials Antioxidant 1520 CAS 110553-27-0 Rubber Antioxidant​ Introduction: Boiling point :532.2±45.0 °C(Predicted) density :0.990±0.06 g/cm3(Predicted) vapor pressure :1Pa at 25℃ Uses: Antioxidant 1520 can be used as a new type of antioxidant for rubber, mainly in synthetic rubbers such as butadiene rubber, styrene butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomers, etc. Its dosage is small, the antioxidant effect is good, and

qualidade Aromas e fragrâncias Pó branco Câmfora CAS 76-22-2 Materiais orgânicos sintéticos fábrica

Aromas e fragrâncias Pó branco Câmfora CAS 76-22-2 Materiais orgânicos sintéticos

Flavors and Fragrances White Powder Camphor CAS 76-22-2 Organic Synthetic Materials Overview Colorless or white crystals, granular or easily broken blocks. Has a pungent aromatic odor. Volatile slowly at room temperature. Slightly soluble in water, soluble in ethanol, carbon disulfide, solvent naphtha, and volatile or non-volatile oils. Product Parameters Item Value Product Name Camphor CAS 76-22-2 MF C10H16O MW 152.23 EINECS 200-945-0 Appearance White Powder Product Image

qualidade Agente Auxiliar Químico Cloreto Estanoso Dihidrato CAS 10025-69-1 Agente Redutor Mordante fábrica

Agente Auxiliar Químico Cloreto Estanoso Dihidrato CAS 10025-69-1 Agente Redutor Mordante

Chemical Auxiliary Agent Stannous Chloride Dihydrate CAS 10025-69-1 Reducing Agent Mordant Introduction: Stannous chloride, chemical formula SnCl2, is also called tin dichloride. There are anhydrous and hydrated forms. The former is transparent crystal with a melting point of 246℃, a boiling point of 652℃ and a relative density of 3.95. It is soluble in water and oxidized in the air to form insoluble chlorine oxide. Uses: Stannous chloride can be used as a reducing agent in

qualidade Antioxidantes Tert-butilhidroquinona CAS 1948-33-0 Aditivos alimentares fábrica

Antioxidantes Tert-butilhidroquinona CAS 1948-33-0 Aditivos alimentares

Antioxidants Tert-Butylhydroquinone CAS 1948-33-0 Food Additives Overview of Antioxidants Tert-Butylhydroquinone CAS 1948-33-0 Food Additives White to light grey crystals or crystalline powder. Has a very slight special smell. Suitable for crude oil and highly unsaturated oils, such as sunflower oil. For cooking oil and baked products, it is suitable for use with BHA, but is suitable for deep-fried products. The general dosage is 100-200 mg/kg. This product is white or

qualidade Agente tensioativo Span 60 CAS 1338-41-6 Cromatografia a gás Emulsionante em fase estacionária Espessante fábrica

Agente tensioativo Span 60 CAS 1338-41-6 Cromatografia a gás Emulsionante em fase estacionária Espessante

Surfactant Span 60 CAS 1338-41-6 Gas Chromatography Stationary Phase Emulsifier Thickener Introduction: White to light yellow powdery, waxy, or blocky substance with a slight fat odor. Relative density of 0.98-1.0, melting point of 51 ℃. It can be dispersed in hot water and is miscible with oils and general organic solvents. The HLB value is 4.7. Uses: Used as emulsifier and stabilizer in the pharmaceutical, cosmetics, food, pesticide, coating, and plastic industries, and as

qualidade Conservantes Intermediários Orgânicos 1,1,33-tetrametoxipropano CAS 102-52-3 Intermediários farmacêuticos e corantes fábrica

Conservantes Intermediários Orgânicos 1,1,33-tetrametoxipropano CAS 102-52-3 Intermediários farmacêuticos e corantes

Preservatives Organic Intermediate 1,1,3,3-Tetramethoxypropane CAS 102-52-3 Pharmaceutical And Dye Intermediates Introduction: Boiling point 183 °C (lit.) 70-75 °C/15 mmHg (lit.) Density 0.997 g/mL at 25 °C (lit.) Vapor pressure 1.7 hPa (20 °C) Refractive index n20/D 1.407 (lit.) Flash point 130 °F Uses: The ester compounds synthesized based on 1,1,3,3-tetramethoxypropane have ester-forming quaternary carbon atoms at the β position of the 1,1,3,3-tetramethoxypropane molecular

qualidade Extratos de Plantas Emulsionantes Ácido Mirístico CAS 103-16-2 FEMA 2764 Agente Impermeabilizante fábrica

Extratos de Plantas Emulsionantes Ácido Mirístico CAS 103-16-2 FEMA 2764 Agente Impermeabilizante

Emulsifier Plant Extracts Myristic Acid CAS 103-16-2 FEMA 2764 Waterproofing Agent Introduction: Myristic acid is also called tetradecanoic acid. Crystallized from methanol is a white crystalline or leaflet-shaped waxy solid. It has a faint waxy and milky aroma. It exists naturally in fish oil, coconut oil, babassu oil and cottonseed oil. Relative density 0.8439 (80°C). Melting point 58°C. Boiling point 250.5°C (13.3 kPa, 100 mmHg). Refractive index 1.4305 (60°C). Insoluble