plastic stabilizer
"
Colorless Liquid PPG15 – STEARYL E-THER CAS 25231-21-4 Humectant and Penetrating Agent
Colorless Liquid PPG15 STEARYL E-THER CAS 25231-21-4 Humectant and Penetrating Agent Overview PPG15 STEARYL E-THER can be used as a pharmaceutical excipient and possesses properties such as surfactant, softener, lubricant, wetting agent, plasticizer, solubilizer, and dispersant. Pharmaceutical excipients or pharmaceutical additives refer to other chemical substances other than drug components used in the pharmaceutical process. Pharmaceutical excipients generally refer to
Chemical Raw Materials Oleamide CAS 301-02-0 Chemical Auxiliary Agent
Chemical Raw Materials Oleamide CAS 301-02-0 Chemical Auxiliary Agent Overview of Chemical Raw Materials Oleamide CAS 301-02-0 Chemical Auxiliary Agent It is a non-ionic surfactant, also known as 9-octadecanoic acid amide or oil amide. It is white powder or sheet at room temperature, non-toxic, and insoluble in water Product Parameters of Chemical Raw Materials Oleamide CAS 301-02-0 Chemical Auxiliary Agent Item Value Product Name Oleamide CAS 301-02-0 MF C18H35NO MW 281.48
Surfactants Daily Chemicals Palmitic Acid CAS 57-10-3 FEMA 2832 Emulsifier Dispersant Defoamer
Surfactants Daily Chemicals Palmitic Acid CAS 57-10-3 FEMA 2832 Emulsifier Dispersant Defoamer Introduction: White phosphorus flakes with pearly luster. Insoluble in water, soluble in ethanol. Palmitic acid, also known as hexadecanoic acid, is one of the most widely distributed fatty acids in nature. It is white crystals at room temperature. It is widely present in various oils and fats, such as tung oil, palm oil, lacquer, cottonseed oil, soybean oil, peanut oil, corn germ
Organic Antioxidant 1520 C25H44OS2 CAS 110553-27-0 Rubber Antioxidant
Organic Raw Materials Antioxidant 1520 CAS 110553-27-0 Rubber Antioxidant Introduction: Boiling point :532.245.0 C(Predicted) density :0.9900.06 g/cm3(Predicted) vapor pressure :1Pa at 25 Uses: Antioxidant 1520 can be used as a new type of antioxidant for rubber, mainly in synthetic rubbers such as butadiene rubber, styrene butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomers, etc. Its dosage is small, the antioxidant effect is good, and
Flavors and Fragrances White Powder Camphor CAS 76-22-2 Organic Synthetic Materials
Flavors and Fragrances White Powder Camphor CAS 76-22-2 Organic Synthetic Materials Overview Colorless or white crystals, granular or easily broken blocks. Has a pungent aromatic odor. Volatile slowly at room temperature. Slightly soluble in water, soluble in ethanol, carbon disulfide, solvent naphtha, and volatile or non-volatile oils. Product Parameters Item Value Product Name Camphor CAS 76-22-2 MF C10H16O MW 152.23 EINECS 200-945-0 Appearance White Powder Product Image
Chemical Auxiliary Agent Stannous Chloride Dihydrate CAS 10025-69-1 Reducing Agent Mordant
Chemical Auxiliary Agent Stannous Chloride Dihydrate CAS 10025-69-1 Reducing Agent Mordant Introduction: Stannous chloride, chemical formula SnCl2, is also called tin dichloride. There are anhydrous and hydrated forms. The former is transparent crystal with a melting point of 246, a boiling point of 652 and a relative density of 3.95. It is soluble in water and oxidized in the air to form insoluble chlorine oxide. Uses: Stannous chloride can be used as a reducing agent in
Antioxidants Tert-Butylhydroquinone CAS 1948-33-0 Food Additives
Antioxidants Tert-Butylhydroquinone CAS 1948-33-0 Food Additives Overview of Antioxidants Tert-Butylhydroquinone CAS 1948-33-0 Food Additives White to light grey crystals or crystalline powder. Has a very slight special smell. Suitable for crude oil and highly unsaturated oils, such as sunflower oil. For cooking oil and baked products, it is suitable for use with BHA, but is suitable for deep-fried products. The general dosage is 100-200 mg/kg. This product is white or
Surfactant Span 60 CAS 1338-41-6 Gas Chromatography Stationary Phase Emulsifier Thickener
Surfactant Span 60 CAS 1338-41-6 Gas Chromatography Stationary Phase Emulsifier Thickener Introduction: White to light yellow powdery, waxy, or blocky substance with a slight fat odor. Relative density of 0.98-1.0, melting point of 51 . It can be dispersed in hot water and is miscible with oils and general organic solvents. The HLB value is 4.7. Uses: Used as emulsifier and stabilizer in the pharmaceutical, cosmetics, food, pesticide, coating, and plastic industries, and as
Preservatives Organic Intermediate 1,1,3,3-Tetramethoxypropane CAS 102-52-3 Pharmaceutical And Dye Intermediates
Preservatives Organic Intermediate 1,1,3,3-Tetramethoxypropane CAS 102-52-3 Pharmaceutical And Dye Intermediates Introduction: Boiling point 183 C (lit.) 70-75 C/15 mmHg (lit.) Density 0.997 g/mL at 25 C (lit.) Vapor pressure 1.7 hPa (20 C) Refractive index n20/D 1.407 (lit.) Flash point 130 F Uses: The ester compounds synthesized based on 1,1,3,3-tetramethoxypropane have ester-forming quaternary carbon atoms at the position of the 1,1,3,3-tetramethoxypropane molecular
